Signature 12" Red LED S/T/I Light – 20 Diodes, 3 Bare Wires

20 Red LED Diodes. Signature Series Styling. Surface/Screw Mount. Three Bare-Wire Leads.

Bring distinctive red LED lighting to compatible commercial trucks, trailers, recreational vehicles, and specialty vehicles with Kaper II's Signature 12" Red LED S/T/I Light.

Featuring twenty LED diodes, red illumination, and an elongated nominal 12-inch profile, this lamp combines modern LED technology with the recognizable styling of Kaper II's Signature Series.

Its surface/screw-mount configuration provides an installation method for compatible vehicle surfaces, while three bare-wire leads allow connection to an appropriately configured vehicle electrical system.

This product carries the manufacturer's S/T/I designation. The exact lighting functions represented by that designation and the electrical operating requirements should be confirmed against the manufacturer's technical documentation.

Key Features & Benefits

• 12-Inch Signature Profile: Features an elongated nominal 12-inch lighting configuration.

• 20 Red LED Diodes: Incorporates twenty LED light sources with red illumination.

• S/T/I Designation: Identifies the lamp within the manufacturer's S/T/I lighting family.

• Surface/Screw Mount: Intended for surface-mounted, screw-secured installation.

• Three Bare-Wire Leads: Provides three unterminated conductors for compatible wiring connections.

• Signature Series Styling: Coordinates with compatible Kaper II Signature lighting products.

• Solid-State LED Technology: Uses LED illumination rather than traditional incandescent filaments.

• OEM Installation Potential: Offers a defined mounting and connection configuration for qualifying vehicle assembly applications.

• Replacement Applications: A potential replacement option when electrical specifications, dimensions, and lighting functions match the original equipment.

Product Specifications

Signature Series Design

Kaper II's Signature Series provides distinctive lighting configurations for commercial and recreational vehicles.

This model features a nominal 12-inch profile, offering an elongated appearance compared with smaller conventional vehicle lamps.

Its red LED illumination and Signature Series styling can complement compatible vehicle exterior lighting arrangements.

Twenty Red LED Diodes

The lamp incorporates twenty LED diodes that provide red illumination.

LED technology uses solid-state electronic light sources rather than incandescent filaments.

The twenty-diode configuration is an important identifying feature when comparing this product with the eighteen-SMD versions in the Signature S/T/I family.

The supplied description identifies the diode count but does not establish whether the components are SMD or another LED package type.

LED count alone does not establish brightness, wattage, current draw, or regulatory compliance.

These characteristics depend on the complete electrical and optical design and should be verified through manufacturer specifications.

S/T/I Lighting Designation

This lamp is identified by the manufacturer's S/T/I designation.

The exact meaning of S/T/I has not been established from the supplied product description.

For catalog accuracy, the designation should remain unchanged until the manufacturer's technical documentation confirms the supported lighting functions.

The lamp should not automatically be described as a stop/turn/tail light or assigned another specific combination of functions.

This is particularly important for OEM vehicle manufacturers and replacement-part customers who must select lighting equipment for defined electrical and regulatory applications.

Three Bare-Wire Leads

This version features three bare-wire leads.

Unlike lamps supplied with a molded connector or preattached plug, the bare-wire configuration provides unterminated conductors for connection to a compatible vehicle wiring harness.

This can be useful in qualifying OEM assembly operations and replacement installations where the wiring system is designed for direct connections.

However, the presence of three wires does not establish their individual functions, polarity, or operating modes.

Wire colors, lead length, voltage, and electrical assignments have not been supplied.

Installers should consult the manufacturer's wiring diagram before connecting the lamp.

Surface/Screw-Mount Installation

The lamp is identified as surface/screw-mounted.

This indicates that the light is intended to mount against a compatible vehicle surface using a screw-secured installation method.

The supplied description does not establish the exact fastener type, number of mounting holes, mounting-hole spacing, or whether mounting hardware is included.

Verify these details against the manufacturer's installation drawing before installation.

Red Illumination and Lens Configuration

This lamp provides red LED illumination.

Red vehicle lighting is commonly used in designated rear vehicle applications, depending on the lamp's approved function.

However, the supplied description does not identify the lens color.

The lens may have a different appearance from the emitted red light, so illumination color and lens color should be maintained as separate catalog attributes.

Do not assign this model a red, clear, or smoked lens until the correct configuration has been verified.

Potential Applications

Commercial Trucks: Red LED lighting for compatible vehicle positions where the manufacturer's specified S/T/I functions are appropriate.

Trailers: Lighting installations requiring the corresponding electrical configuration and approved functions.

RVs and Motorhomes: Exterior red LED lighting for qualifying recreational vehicle applications.

Specialty Vehicles: Lighting for compatible utility, service, and custom-built vehicles.

OEM Vehicle Manufacturers: A potential component for assembly programs specifying a 12-inch Signature LED lamp with twenty diodes and three bare-wire leads.

Installation Considerations

Before installation, verify the operating voltage, individual wire functions, polarity, mounting dimensions, and approved lighting applications.

Confirm that the vehicle electrical system is compatible with the lamp's three bare-wire leads.

Use suitable electrical connections and protect the completed wiring against moisture, vibration, and mechanical damage.

Verify that the mounting surface accommodates the surface/screw-mount configuration.

Confirm that the lamp's position, orientation, and visibility meet applicable vehicle lighting requirements.

Do not assume the lamp supports stop, turn, tail, identification, clearance, or side marker functions until the manufacturer-defined S/T/I designation has been verified.

Follow the manufacturer's installation instructions and applicable vehicle lighting regulations.

Important: The supplied description confirms the Signature Series family, nominal 12-inch length, twenty red LED diodes, S/T/I designation, surface/screw mounting, and three bare-wire leads. Lens color, LED package type, exact lighting functions, voltage, wiring assignments, dimensions, mounting hardware, and compliance markings require verification.