The 12V Amber LED 3-Light Identification Bar provides a complete three-lamp identification lighting assembly for compatible trailers, trucks, RVs, buses, and commercial vehicles.
This assembly features three amber LED lamps, with 8 LEDs per lamp for a total of 24 light-emitting diodes across the bar. The lights are mounted to a black high-impact ABS base and use polycarbonate lenses for a durable, vehicle-ready lighting assembly. Kaper II identifies the amber version as 1A-S-326A and specifies 12V operation with an FMVSS P2/P3 rating.
Three Amber 8-Diode LED Lights
Rather than using a single continuous light source, this identification bar incorporates three individual LED lamps.
Each lamp contains:
- 8 LED diodes
- Amber illumination
- Polycarbonate lens
Combined, the assembly provides 24 LEDs across three identification lights.
LED technology provides the familiar benefits of:
- Instant illumination
- Low power consumption
- Long service life
- Reduced maintenance
- No traditional incandescent filaments
Amber Identification Lighting
The amber configuration is especially important when determining where this bar belongs on a vehicle.
Under FMVSS 108, vehicles such as trailers, trucks, buses, and multipurpose passenger vehicles 80 inches or more in overall width require three amber identification lamps and three red identification lamps, with amber identification lamps used toward the front and red identification lamps toward the rear.
This makes the amber bar particularly relevant for compatible wide:
- Trailers
- Semi-trailers
- Commercial trucks
- RVs and motorhomes
- Buses
- Specialty vehicles
Final compliance depends on the complete vehicle installation, including lamp location, spacing, orientation, and vehicle classification.
Black High-Impact ABS Base
All three lights are mounted to a black high-impact ABS base, creating a complete identification-bar assembly rather than requiring three individual lights to be mounted separately.
The black base provides a clean, neutral appearance that integrates well with trailer, truck, RV, and commercial vehicle exteriors.
Harness with 1 Bare Wire & 1 Eyelet
The identification bar includes a wiring harness featuring:
- 1 bare wire
- 1 eyelet connection
This exact harness configuration is specified by Kaper II for the three-light LED bar.
The eyelet connection is useful for establishing the appropriate electrical connection at a compatible mounting or grounding point, while the bare lead can be integrated into the appropriate vehicle lighting circuit. Verify the actual wire functions and grounding arrangement before installation.
12V LED Identification Bar
Kaper II specifies this identification bar for 12V operation, making it suitable for compatible 12V vehicle and trailer electrical systems.
Potential applications include:
- Utility trailers
- Cargo trailers
- Enclosed trailers
- Equipment trailers
- Flatbed trailers
- Semi-trailers
- Commercial trucks
- RVs
- Motorhomes
- Buses
- Fleet vehicles
- Specialty vehicles
Specifications
| Specification |
Details |
| Product Type |
LED Identification Light Bar |
| Light Color |
Amber |
| Number of Lights |
3 |
| LED Count Per Light |
8 Diodes |
| Total LED Count |
24 Diodes |
| Operating Voltage |
12V |
| Lens Material |
Polycarbonate |
| Base Material |
High-Impact ABS |
| Base Color |
Black |
| Wiring Harness |
1 Bare Wire + 1 Eyelet |
| FMVSS Rating |
P2 / P3 |
| Primary Function |
Vehicle Identification Lighting |
| Kaper II Reference |
1A-S-326A |
Specifications above are confirmed by Kaper II's current product information.
Features
- 3-light amber LED identification bar
- 8 LED diodes per light
- 24 total LED diodes
- 12V operation
- Amber identification lighting
- Polycarbonate lenses
- Black high-impact ABS base
- Harness with 1 bare wire and 1 eyelet
- FMVSS P2/P3 rated
- Instant LED illumination
- Low power consumption
- Long-life LED technology
- Reduced maintenance
- Great for wide trailer applications
- Suitable for compatible trucks and commercial vehicles
- Useful for RVs, motorhomes, buses, and specialty vehicles
- Complete three-light bar configuration
Applications & Compatibility
This 12V Amber 3-Light LED Identification Bar is particularly well suited for compatible:
- Utility trailers
- Cargo trailers
- Enclosed trailers
- Equipment trailers
- Flatbed trailers
- Semi-trailers
- Commercial trailers
- Commercial trucks
- Heavy-duty trucks
- RVs
- Motorhomes
- Buses
- Fleet vehicles
- Specialty vehicles
Vehicles 80 Inches or Wider
Identification lighting is particularly important for wider commercial and trailer applications. FMVSS 108 requires three amber identification lamps on applicable trucks, trailers, buses, and multipurpose passenger vehicles measuring 80 inches or more in overall width.
For a compliant installation, the complete vehicle configuration—including lamp position, spacing, mounting height, and orientation—must meet the applicable requirements.
Important Fitment Note
Before ordering, verify:
- Overall identification bar dimensions
- Mounting-hole locations and spacing
- 12V electrical compatibility
- Bare-wire function
- Eyelet connection/grounding arrangement
- Available mounting clearance
- Required lamp location
- Vehicle overall width
- Identification-light spacing and orientation
The product information confirms the three 8-diode lights, polycarbonate lenses, black high-impact ABS base, 12V operation, bare-wire/eyelet harness, and P2/P3 rating.
Marketing Callout
3 AMBER LIGHTS. 8 LEDs EACH. 24 TOTAL DIODES.
12V POWER. BLACK ABS BASE. P2/P3 IDENTIFICATION LIGHTING.
A complete amber LED identification bar built for trailers, trucks, RVs, buses, and commercial vehicles.
