8" Oval Red LED Stop/Turn/Tail Light – 10 Diodes, Reflex, Chrome Bezel & Gasket

Three Lighting Functions. Integrated Reflex Reflector. Chrome-Accented Design.

Bring together rear vehicle signaling, passive reflection, and a polished exterior appearance with Kaper II's 8-Inch Oval Red LED Stop/Turn/Tail Light.

Featuring 10 red LED diodes, this combination lamp provides stop, turn signal, and tail lighting functions within one oval fixture.

The integrated reflex reflector adds a passive reflective feature, while the chrome bezel provides a distinctive visual finish.

A gasket is also included in the product configuration, making this lamp an option for compatible OEM vehicle manufacturing, trailer lighting, fleet maintenance, and replacement applications.

Key Features & Benefits

• Triple-Function Lighting: Combines stop, turn, and tail lighting in one fixture.

• 10 Red LED Diodes: Features a defined 10-diode red LED configuration.

• Integrated Reflex Reflector: Adds a passive reflective element that does not depend on the lamp's LEDs being powered.

• 8-Inch Oval Design: Provides a larger nominal oval format than conventional 6-inch oval lamps.

• Chrome Bezel: Adds a polished exterior accent around the lamp.

• Gasket Included: Provides a gasket component for the intended installation.

• LED Technology: Uses solid-state lighting rather than traditional incandescent filaments.

• Combination Rear Lighting: Integrates three rear signaling functions into one assembly.

• OEM Lighting Applications: Can be evaluated for compatible truck, trailer, RV, and specialty vehicle production.

• Replacement Lighting Option: May be suitable where an existing lamp has matching mounting and electrical specifications.

Product Specifications

Three Essential Rear Lighting Functions

Stop / Brake Light

The stop light function communicates vehicle braking through red illumination when connected to the appropriate brake-light circuit.

Turn Signal

The turn signal function communicates the driver's intended turning direction through a flashing signal when connected to a compatible signaling system.

Tail / Running Light

The tail light function provides rear position lighting when the applicable exterior lighting circuit is activated.

Combining these three functions into one lamp can simplify component selection for compatible vehicle lighting assemblies.

The supplied description does not establish the exact wiring configuration or relative illumination output of each function.

10 Red LED Diodes

This lamp features 10 red LED diodes.

The diode count is a useful specification for product identification and comparison with other stop/turn/tail lamps in the Kaper II catalog.

LEDs produce light through solid-state electronic components rather than heated incandescent filaments.

However, diode count alone does not establish brightness, lumen output, visibility distance, electrical consumption, or regulatory compliance.

Those performance characteristics depend on the complete lamp design, including the LEDs, optics, and electrical circuitry.

Integrated Reflex Reflector

One of this lamp's most important distinguishing features is its reflex reflector.

A reflex reflector returns a portion of incoming light toward its source, providing passive visibility when illuminated by another vehicle's headlights or another external light source.

Unlike the powered stop, turn, and tail functions, the reflex element does not require electrical power to reflect incoming light.

This makes the reflex feature a useful addition to the lamp's rear vehicle lighting configuration.

However, the presence of a reflex reflector does not automatically establish compliance with applicable reflector requirements.

The reflector's certification, positioning, and suitability for the intended vehicle application must be verified.

Chrome Bezel

The chrome bezel adds a polished exterior appearance around the oval lamp.

This feature may appeal to manufacturers and vehicle owners seeking a more finished appearance than a basic black-trim lighting fixture.

The chrome bezel is particularly relevant to compatible RV, trailer, commercial vehicle, and specialty equipment applications where exterior appearance is an important design consideration.

The supplied title does not establish whether the bezel is metal, chrome-plated plastic, or another material.

Gasket Included

This product configuration includes a gasket.

A properly specified gasket can help create a defined interface between the lamp assembly and its intended mounting surface.

Depending on the complete product design and installation requirements, a gasket may also help limit unwanted moisture or debris intrusion around the mounting interface.

However, the supplied description does not identify the gasket material, thickness, compression requirements, or sealing performance.

The gasket should not be interpreted as confirmation of a waterproof or submersible rating.

8-Inch Oval Configuration

The nominal 8-inch oval format distinguishes this model from the 6-inch oval stop/turn/tail lights previously cataloged.

Its larger nominal format may be relevant to manufacturers designing rear lighting layouts or replacing existing 8-inch oval fixtures.

However, nominal size does not establish the lamp's exact outside dimensions or mounting requirements.

Actual dimensions, fixture depth, mounting-hole pattern, and installation clearance must be confirmed before ordering.

Potential Applications

Commercial Trucks

A potential rear combination lighting option for compatible commercial truck applications.

Cargo and Utility Trailers

May be suitable for qualifying trailer stop/turn/tail lighting assemblies.

RV and Motorhome Lighting

Can be evaluated for compatible recreational vehicle rear lighting installations.

Specialty Vehicles

An option for manufacturers seeking a chrome-accented combination lamp with a reflex feature.

OEM Vehicle Manufacturing

The 8-inch oval configuration, 10 red LEDs, reflex reflector, chrome bezel, and gasket provide useful specifications for vehicle lighting component selection.

Fleet Maintenance

May be suitable when replacing an existing combination lamp with matching electrical and mounting specifications.

These are potential applications rather than confirmed vehicle fitment or regulatory approvals.

Installation Considerations

Before installation, confirm:

• Actual lamp length, width, and depth.

• Mounting configuration and required opening dimensions.

• Chrome bezel attachment method.

• Gasket positioning and installation requirements.

• Whether additional mounting hardware is required.

• Operating voltage and electrical requirements.

• Wiring configuration and connector type.

• Stop, turn, and tail circuit assignments.

• Correct electrical polarity.

• Compatibility with the vehicle's signaling system.

• Reflex reflector certification and positioning requirements.

• Applicable DOT, FMVSS, and SAE requirements.

• Weather-exposure suitability.

• Compatibility with the intended vehicle and mounting location.

Follow Kaper II's installation instructions and applicable vehicle lighting requirements.

Important: The supplied description confirms an 8-inch oval stop/turn/tail lamp featuring 10 red LEDs, a reflex reflector, chrome bezel, and gasket. Mounting configuration, connection type, voltage, dimensions, gasket material, and regulatory certification require verification.