3/4" Round Amber Sealed LED Marker/Clearance Light – 1 SMD, 10" Bare Leads, Grommet Included

Small Footprint. Sealed Design. Amber Marker and Clearance Lighting.

Add compact vehicle marking illumination with Kaper II's 3/4" Round Amber Sealed LED Marker/Clearance Light.

Featuring a single surface-mounted device (SMD) LED, this compact round light is identified for P2/P3 marker and clearance lighting applications.

The sealed light assembly includes 10-inch bare-wire leads made from 18 AWG wire, along with a mounting grommet for compatible installations.

Its small nominal diameter makes it an option for vehicle applications where a compact marker or clearance light is required.

Whether outfitting a trailer, maintaining a commercial vehicle, or completing a specialty vehicle lighting project, this Kaper II light combines a compact configuration with clearly specified electrical leads and an included mounting accessory.

Key Features & Benefits

• 3/4" Round Design: Compact circular lighting configuration for compatible mounting locations.

• Amber Illumination: Intended for qualifying amber marker and clearance lighting applications.

• P2/P3 Classification: Identified with P2/P3 lighting designations.

• 1 SMD LED: Features one surface-mounted LED.

• Sealed Light Assembly: Identified as a sealed lighting unit.

• 10" Bare-Wire Leads: Includes 10-inch electrical leads for connection to a compatible wiring system.

• 18 AWG Wire: Wire gauge is specified for easier identification during installation planning.

• Mounting Grommet Included: Supplies the grommet for compatible mounting.

• LED Technology: Provides illumination without a traditional incandescent filament.

• Compact Installation Format: Suitable for consideration where a small round marker or clearance light is needed.

Product Specifications

Vehicle Applications

Trailer Marker and Clearance Lighting

A compact lighting option for compatible cargo trailers, utility trailers, equipment trailers, and specialty trailers requiring amber vehicle marking illumination.

Commercial Truck Lighting

May be suitable for qualifying commercial truck marker and clearance light installations.

RV and Motorhome Lighting

Can be considered for compatible RV and motorhome applications requiring a small amber LED light.

Work Trucks and Specialty Vehicles

An option for compatible service vehicles, utility trucks, and specialty vehicle lighting projects.

Fleet Maintenance

Provides a replacement lighting option for vehicles using compatible 3/4-inch round marker or clearance lights.

These are potential application categories. Exact fitment and regulatory suitability must be confirmed for the intended vehicle and mounting position.

Compact 3/4-Inch Round Design

The 3/4-inch round configuration is one of this light's defining features.

Its compact nominal size provides a lighting option for applications where a larger 2-inch or 2.5-inch marker light may not be appropriate.

Customers should verify the actual outside diameter, mounting opening, grommet dimensions, and installation depth before ordering.

Single SMD LED Configuration

This marker/clearance light features one SMD LED.

SMD stands for Surface-Mounted Device, referring to an electronic component mounted directly onto a circuit board.

The single-LED configuration distinguishes this product from Kaper II marker lights featuring three, nine, or thirteen LEDs.

The supplied specifications do not establish measured brightness, wattage, current draw, or expected service life.

P2/P3 Marker and Clearance Classification

This product is identified with P2/P3 designations and described as a marker/clearance light.

These designations are relevant to vehicle lighting classifications and should be preserved in the technical product specifications.

However, the product title alone does not establish the exact certified functions, applicable installation positions, or compliance with a particular SAE or DOT requirement.

Customers should verify the product's approval markings and technical documentation for the intended application.

Sealed Light Assembly

The light is identified as having a sealed construction.

This is an important product characteristic for vehicle lighting installations where exposure to environmental conditions may be a consideration.

However, sealed construction should not be interpreted as a specific waterproof, submersible, or IP-rated performance claim without supporting documentation.

10-Inch Bare-Wire Leads

The product includes 10-inch bare-wire electrical leads.

Bare-wire termination allows the leads to be connected using an appropriate wiring method for the intended installation.

The supplied description does not identify the number of wires, their colors, or their electrical functions.

Customers should verify wiring requirements before connecting the light.

18 AWG Wire

The electrical leads are specified as 18 AWG.

AWG stands for American Wire Gauge, a standardized system used to identify conductor size.

Providing the wire gauge helps installers select appropriate compatible connections and plan the electrical installation.

The specified wire gauge does not independently establish the light's operating voltage or current draw.

Mounting Grommet Included

The included grommet supplies a mounting accessory for compatible installations.

This helps customers identify the required mounting component without assuming that a separate grommet purchase is necessary.

The exact mounting-hole size and compatible panel thickness should be verified before installation.

Installation Recommendations

Before installation, verify:

• Actual light and grommet dimensions.

• Required mounting-hole diameter.

• Mounting surface and panel thickness.

• Operating voltage.

• Number and function of electrical leads.

• Wire polarity and grounding requirements.

• Suitable connections for 18 AWG bare-wire leads.

• Vehicle mounting position.

• Applicable marker and clearance lighting regulations.

Follow Kaper II's installation instructions and use electrical connections suitable for the vehicle's operating environment.

Confirm applicable SAE/DOT certifications for the intended lighting position.

Important: The supplied designation confirms a 3/4-inch round amber sealed marker/clearance light, P2/P3 designation, one SMD LED, 10-inch 18 AWG bare-wire leads, and an included grommet. Exact dimensions, voltage, wire count, environmental rating, and regulatory certifications require verification.