3/4" Round Red PC2 Sealed LED Marker/Clearance Light – 1 SMD, .180" Male Bullet Connectors, 10" Sheathed Leads & Grommet

Compact Red Lighting. Protected Leads. Pre-Terminated Connections.

Equip compatible vehicles with Kaper II's 3/4" Round Red PC2 Sealed LED Marker/Clearance Light.

Featuring one surface-mounted device (SMD) LED, this compact round light produces red illumination and is identified with a PC2 marker/clearance designation.

The sealed assembly includes 10-inch electrical leads with protective sheathing and .180-inch male bullet terminals, along with a mounting grommet for compatible installation.

Its combination of compact dimensions, pre-terminated electrical connections, and sheathed leads makes it a practical lighting component for qualifying trailers, commercial trucks, RVs, and specialty vehicles.

Key Features & Benefits

• 3/4" Round Design: Compact circular lighting configuration for compatible mounting locations.

• Red LED Illumination: Produces red light for qualifying vehicle marking applications.

• PC2 Designation: Identified for PC2 marker/clearance lighting applications.

• 1 SMD LED: Features one surface-mounted LED.

• Sealed Construction: Identified as a sealed lighting assembly.

• 10" Electrical Leads: Provides a defined wiring length for installation planning.

• Protective Wire Sheathing: Adds an outer protective covering around the specified leads.

• .180" Male Bullet Terminals: Pre-terminated connections for compatible female bullet terminals.

• Reduced Field Termination: Eliminates the need to attach male bullet terminals to the supplied leads when the mating harness is compatible.

• Mounting Grommet Included: Supplies a mounting accessory for compatible installation.

• LED Technology: Uses solid-state lighting rather than a traditional incandescent filament.

Product Specifications

Vehicle Applications

Trailer Marker and Clearance Lighting

A compact lighting option for compatible cargo trailers, utility trailers, equipment trailers, and specialty trailers requiring red vehicle marking illumination.

Commercial Truck Lighting

May be suitable for qualifying commercial truck marker and clearance lighting installations.

RV and Motorhome Lighting

Can be considered for compatible RV and motorhome applications requiring compact red LED lighting.

Work Trucks and Specialty Vehicles

An option for compatible service trucks, utility vehicles, and specialty vehicle lighting projects.

OEM Vehicle Manufacturing

The combination of compact sealed lighting, sheathed electrical leads, and pre-terminated male bullet connectors may be useful for manufacturers selecting lighting components for production wiring systems.

These are potential applications. Exact fitment, electrical compatibility, and regulatory suitability must be verified for the intended vehicle and mounting position.

Compact 3/4-Inch Round Design

The 3/4-inch round configuration provides a compact lighting format for installations where a larger marker light may not be appropriate.

Customers should verify the actual outside diameter, required mounting opening, and installation depth before ordering.

Red LED Illumination

This model produces red illumination for qualifying marker and clearance lighting applications.

Red vehicle marking lights are commonly used in designated rear vehicle positions, subject to applicable lighting requirements.

The supplied description does not specify the lens color or establish the exact approved mounting position.

Customers should verify the required emitted color and regulatory classification for their intended installation.

Single SMD LED Configuration

This light features one SMD LED.

SMD stands for Surface-Mounted Device, referring to an electronic component mounted directly onto a circuit board.

The single-LED configuration distinguishes this product from Kaper II marker lights featuring multiple LEDs.

The supplied specifications do not establish measured brightness, wattage, current draw, or expected service life.

PC2 Marker/Clearance Designation

This product is identified with a PC2 designation and described as a marker/clearance light.

PC2 is associated with combination clearance and side-marker lighting applications, making it an important technical characteristic for vehicle manufacturers and replacement-part buyers.

The product description alone does not establish the exact certified functions, applicable installation positions, or compliance with a particular SAE or DOT requirement.

Customers should verify the product's approval markings and technical documentation for the intended application.

Sealed Light Assembly

The light is identified as having sealed construction.

This is an important characteristic for vehicle lighting installations where exposure to environmental conditions may be a consideration.

However, sealed construction should not be interpreted as a specific waterproof, submersible, or IP-rated performance claim without supporting documentation.

10-Inch Electrical Leads with Protective Sheathing

This model includes 10-inch electrical leads with protective sheathing.

The sheathing provides an additional outer covering around the specified wiring, distinguishing this model from versions supplied without a stated sheath.

This can be useful for wiring installations where an additional protective covering is desired.

The supplied description does not establish the sheathing material, temperature rating, abrasion-resistance rating, or environmental certification.

.180-Inch Male Bullet Connectors

One of this model's defining features is its .180-inch male bullet terminal configuration.

Unlike bare-wire versions, the leads are supplied with male bullet terminals already installed.

This provides a convenient connection option for compatible female bullet terminals and vehicle wiring harnesses.

For OEM production and fleet maintenance, pre-terminated leads can help simplify component selection and reduce field termination steps when the mating harness is compatible.

The supplied description does not identify the exact number of terminals, so connector count should be verified before publication.

The description also does not establish a waterproof connector system or a specific mating harness.

Mounting Grommet Included

The included mounting grommet provides a mounting accessory for compatible installations.

This helps simplify component selection by supplying the light and its mounting grommet together.

The required mounting-hole diameter and compatible panel thickness should be verified before installation.

Installation Recommendations

Before installation, verify:

• Actual light and grommet dimensions.

• Required mounting-hole diameter.

• Mounting surface and panel thickness.

• Operating voltage.

• Wire count, polarity, and electrical functions.

• Compatibility with .180-inch male bullet terminals.

• Connector count and mating female terminals.

• Wiring route and required lead length.

• Protective sheathing suitability.

• Vehicle mounting position.

• Applicable marker and clearance lighting regulations.

Follow Kaper II's installation instructions and use electrical connections suitable for the vehicle's operating environment.

Confirm applicable SAE/DOT certifications for the intended lighting position.

Important: The supplied designation confirms a 3/4-inch round red sealed marker/clearance light, PC2 designation, one SMD LED, 10-inch sheathed leads, .180-inch male bullet terminals, and an included grommet. Lens color, connector count, wire gauge, voltage, exact dimensions, environmental rating, and regulatory certifications require verification.